Fusion Mineral Paint - Transfer Gel / Decoupage Medium
Transfer Gel for Image transfers and can also be used as a decoupage medium
Clear, quick drying with a matte finish, ideal for transferring printed images on to wood, paper or other non-oily or greasy, porous surfaces. For interior applications. Water resistant.
Transfer images using only a laser print. Lightly sand the area where the image will be. Apply transfer gel to both the surface and the print. use a good thick layer.
Place printed image face down into the wet gel, press out air bubbles and allow to dry.
When completely dry at least 24 hrs but the longer you leave it the better. Dampen the paper with a wet sponge allowing the water to penetrate the paper pulp.
Carefully rub with a soft cloth or your fingers very gently (or a nylon scouring pad for a weathered look) to remove the paper but leave the image intact. Some bits may come away but this adds to the vintage look. Once dry again, continue to finish as desired with paints, glazes, washed, metallic tints, you name it!