Fusion Mineral Paint - Tough Coat - Clear
Tough Coat Clear
Tough Coat, uses only 100% acrylic and is perfect as a top coat sealer for those high traffic
surfaces such as table tops, seating, doors and floors and dries to a satin finish. FUSION
Tough Coat differs from our competition with its use of pure acrylic. Normally other products on
the market are using lesser acrylic resins which will yellow and embrittle over time, not binding
as well leaving a less durable finish.
Tough Coat Clear: a true non yellowing clear coat
Tough Coat Antiquing: Gives a vintage antique finish
Application: Apply with a damp brush or sprayer or use a slightlty damp rag to apply it.
If applying to a recently painted surface, allow the surface to dry 12 hours before applying.
For maximum durability, apply two coats waiting 2-4 hours between coats. In humid areas,
longer drying times may be required.
Clean Up: Soap and warm water.
Tip: Be sure to gently mix your Tough Coat prior to using it as the matting agent and
other ingredients may settle to the bottom. If you don’t mix it, you may get a shiny coat
finish as the matting agent has settled to the bottom. Do not shake vigorously as this
will cause air bubbles in your piece that are difficult to remove once applied.